Designed for modular, the odd leg frame is quick to install and requires minimal finishing for a neat installation, inside and out. Available in both open out or open in variants.
PDS strongly recommends a <5mm tolerance between finished opening size and over-frame (order) size to prevent frame distortion which will affect performance.
PDS strongly recommends a <5mm tolerance between finished opening size and over-frame (order) size to prevent frame distortion which will affect performance.
Popular industry standard sizes below or available made to measure!
Highy recommended Floor Rebate prior to installation, to enable drainage of water and moisture to the outside of the door, this is not a door threshold option.
15mm low profile threshold
15mm low profile threshold
(must be specified if required)
74mm Door Leaf U-Values:
DuraPass Therma+ 74mm leaf doorsets have 250mm x 1200mm triple glazed argon filled units with warm edge spacers and climaguard glass that have been tested to achieve Part L compliant U Value 1.3.
Where can I find out more about vision panels?
The rear face of the door panel on all standard colour doors is finished in a soft-white light reflecting finish. The frame will match the finish of the front face.
The contrast between door leaf and frame assists with EA compliance for Visual Contrasts and Light Reflective Values (LRV).
Shown right is a Goosewing Grey door from the inside – White inner face, Goosewing Grey Frame.
The area within the arc of the door’s swing must be level or falling away to ensure the door can open unhindered.
If you would like to learn more about Pass Door products or arrange an initial discussion regarding your requirements, talk to our design team:
