2022 changes to building regulations contain requirements relating to the conservation of fuel and power. They set higher standards for the energy performance and carbon emissions of new and existing buildings.
Pass Doors’ DuraPass Doorsets help you meet the new regulations and support the drive for Net-Zero.
DuraPass Therma+ Doors are compliant with Part L of the latest building regs for U-Values in both England (1.6) & *Scotland (1.4).
*Effective from February 2023
Where can I download the Declaration of Performance?
What are the new Part L building regulations?
Exterior grade steel is factory coated in a choice of 5 durable standard colours.
Colours shown are for guide purposes only and are limited by the viewing platform. Always request to see a finish sample for confirmation of colour. RAL numbers are provided as the nearest approximation to the colour and will not match precisely.
Choose a finish from our standard colour palette:
DuraPass Therma+ 74mm leaf doorsets have 250mm x 1200mm triple glazed argon filled units with warm edge spacers and climaguard glass that have been tested to achieve Part L compliant U Value 1.3.
Looking for Part M compliant vision panels on your Pass door? We can help! Find out more about the requirements to satisfy Part M on the vision panels page.
Where can I find out more about vision panels?
The front face of the door is rivet free and the frame is finished to match. The rear face of the door panel on all standard colour and wood effect doors is finished in a soft-white light reflecting finish. The frame will match the finish of the front face.
The contrast between door leaf and frame assists with EA compliance for Visual Contrasts and Light Reflective Values (LRV).
Shown here is a Goosewing Grey door from the inside – White inner face, Goosewing Grey Frame
Where can I find our more about EA compliance?
Good looking and high performance, here’s all the features and benefits you can expect from a single Therma+ steel door.
The dead bolt locking with twin hook latches and four security-pinned stainless-steel hinges per leaf provide robust, dependable security. 8 point locking is the result – 4 security pinned hinges plus the ERA lock’s twin hook latches, latch and mortice.
The corrosion resistant stainless steel handle, lock, strike plate and hinges provide attractive and durably finished secure access.
Supplied with 3 keys and a Euro-profile cylinder as standard. Replacement keys can be duplicated from a standard blank at any locksmith.
No rivets or welds to the front face of the door and colour matched frame as standard.
The door is inherently strong and rigid, yet lightweight. 45kg for a single leaf door and frame is typical, making handling easier and safer.
Standard low-profile threshold with weatherseal makes it easy to move any wheeled item in or out. Open-in or open-out options. Thresholds available to meet the requirements of The Equality Act, Building regulations Part M and BS 3800.
The threshold includes an integral drip tray to help reduce water ingress.
Doors are pre-framed with four stainless steel hinges, two of which are security-pinned.
The Smart Fit colour-matched frame options (Standard, Odd-Leg & Flange) enable fast installation and require minimal finishing following installation.
Q-Lon seals run around the inside of the door frame to help prevent water ingress around the door.
54mm insulated panel in exterior grade steel is factory coated and provides enhanced weather-beating performance – U-Value 1.4 W/m2K.
Inward opening doors include a threshold and seal strip onto which the door leaf closes. This helps to reduce water ingress under the door leaf, further assisted by an integral drip tray (Odd leg Frame only).
Many features of Therma+ double leaf doors are shared with the single leaf door shown above. Below are additional and selected features.
Double doors are available in a range of standard sizes with 50:50 or asymmetric (off-centre) as shown above. You can also choose to have your door open-out. 14-point locking is standard providing robust, dependable security.
The inactive leaf is secured with a shoot bolt at the top ( surface mounted for easy maintenance ) and also has a robust foot operated shoot bolt to secure the door leaf at the bottom
The inactive leaf can also be secured at the top and bottom with robust heavy duty spring loaded shoot bolts.
The dead bolt locking with twin hook latches protected with an anti-jemmy strip (on outward opening doors) and four security-pinned stainless-steel hinges per leaf provide robust, dependable security. 14 point locking is the result – 8 security pinned hinges, twin shoot bolts to the passive leaf plus the ERA lock’s twin hook latches, latch and mortice.
Standard low-profile threshold with weatherseal makes it easy to move any wheeled item in or out. Threshold options are available to meet the requirements of The Equality Act, Building regulations Part M and BS 3800.
The rear face of the door panel on all standard colours is finished in a soft-white light reflecting finish. The frame will match the finish of the front face. The contrast between door leaf and frame assists with EA compliance for Visual Contrasts and Light Reflective Values (LRV).
The Smart Fit frame fits in minutes and requires minimal finishing inside or out. The Flange frame for Steel Buildings is available as a rear fix installation with open-in and open-out configurations.
CE marked for safety and tested to the latest European safety legislation.
Designed for modular, the odd leg frame is quick to install and requires minimal finishing for a neat installation, inside and out. Available in both open out or open in variants.
Where can I find frame technical information?
Stainless steel is also available for aesthetics or clean environment applications.
Who can I talk to about my requirements?
Door are available with a thumb turn as an option.
The CL500 Code Lock works in conjunction with the Exidor 297 Push Pad as shown.
CL500 that incorporates an internal handle and can be used for open-in scenarios.
Door are available with a National Key Scheme lock set that can only be operated by using special NKS or RADAR keys.
Finger protection strips are anti-trapping devices that protect children’s fingers at the most dangerous side of the door: the hanging side.
Optional rain deflectors (shown above) are fitted to the bottom of the door deflecting water from the threshold seal, reducing the risk of water ingress and optional rain guards fitted to the top of the door help repel moisture and wind-driven rain infiltration.
If you would like to learn more about Pass Door products or arrange an initial discussion regarding your requirements, talk to our design team:
