Superior quality, yet fits in minutes
The ideal solution for the cabin and modular building industry!


The front face of the door is rivet free and the frame is finished to match.
The rear face of the door panel on all standard colour and wood effect doors is finished in a soft-white light reflecting finish. The frame will match the finish of the front face.
The contrast between door leaf and frame assists with EA compliance for Visual Contrasts and Light Reflective Values (LRV).
Shown here is a Goosewing Grey door from the inside - White inner face, Goosewing Grey Frame
Award winning innovation
The dead bolt locking with twin hook latches and four security-pinned stainless-steel hinges per leaf provide robust, dependable security. 8 point locking is the result – 4 security pinned hinges plus the ERA lock’s twin hook latches, latch and mortice.
The corrosion resistant stainless steel handle, lock, strike plate and hinges provide attractive and durably finished secure access.
Supplied with 3 keys and a Euro-profile cylinder as standard. Replacement keys can be duplicated from a standard blank at any locksmith.
No rivets or welds to the front face of the door and colour matched frame as standard.
The door is inherently strong and rigid, yet lightweight. 45kg for a single leaf door and frame is typical, making handling easier and safer.
Standard low-profile threshold with weatherseal makes it easy to move any wheeled item in or out. Open-in or open-out options. Thresholds available to meet the requirements of The Equality Act, Building regulations Part M and BS 3800.
The threshold includes an integral drip tray to help reduce water ingress.
Doors are pre-framed with four stainless steel hinges, two of which are security-pinned.
The Smart Fit colour-matched frame options (Standard, Odd-Leg & Flange) enable fast installation and require minimal finishing following installation.
Q-Lon seals run around the inside of the door frame to help prevent water ingress around the door.
44mm Insulated panel in exterior grade steel is factory coated and provides enhanced weather-beating performance - U-Value 1.9 W/m2K.
Inward opening doors include a threshold and seal strip onto which the door leaf closes. This helps to reduce water ingress under the door leaf, further assisted by an integral drip tray.
Award winning innovation
Double doors are available in a range of standard sizes with 50:50 or asymmetric (off-centre) as shown above. You can also choose to have your door open-out. 14-point locking is standard providing robust, dependable security.
The inactive leaf is secured with a shoot bolt at the top ( surface mounted for easy maintenance ) and also has a robust foot operated shoot bolt to secure the door leaf at the bottom.
The inactive leaf can also be secured at the top and bottom with robust heavy duty spring loaded shoot bolts.
The dead bolt locking with twin hook latches protected with an anti-jemmy strip (on outward opening doors) and four security-pinned stainless-steel hinges per leaf provide robust, dependable security. 14 point locking is the result – 8 security pinned hinges, twin shoot bolts to the passive leaf plus the ERA lock’s twin hook latches, latch and mortice.
Standard low-profile threshold with weatherseal makes it easy to move any wheeled item in or out. Threshold options are available to meet the requirements of The Equality Act, Building regulations Part M and BS 3800.
The rear face of the door panel on all standard colour and wood effect doors is finished in a soft-white light reflecting finish. The frame will match the finish of the front face. The contrast between door leaf and frame assists with EA compliance for Visual Contrasts and Light Reflective Values (LRV).
The Smart Fit frame fits in minutes and requires minimal finishing inside or out. The Flange frame for Steel Buildings is available as a rear fix installation with open-in and open-out configurations.
CE marked for safety and tested to the latest European safety legislation.
Designed for modular, the odd leg frame is quick to install and requires minimal finishing for a neat installation, inside and out. Available in both open out or open in variants.
Click here for frame technical informationStainless steel is also available for aesthetics or clean environment applications.
Talk to us about your requirementsDoor are available with a thumb turn as an option.
Single doors are available with an Exidor Push Button Code Lock CL1 as an option.
Single doors are available with an Exidor Push Button Code Lock CL3 as an option. The code on the CL3 can be changed without removing the unit.
If you would like to learn more about Pass Door Fast Fit Steel Door Solutions or arrange an initial discussion regarding your requirements, talk to our design team:
Manufactured in Northern Ireland, delivering throughout the UK & Ireland
1 year Commercial &
2 Year Residential Warranty
Fits in just 15 minutes
Tested and CE Marked
Patented design no. GB2530590