skip to main content

Unframed Motorised Shutter Technical Specification


Standard Specification

  • 165mm box shutters < 1750mm high (colour matched to curtain).
  • 205mm box shutters ≥ 1750mm high (colour matched to curtain).
  • Locking override cover for 205mm boxes only.
  • High level lockable override cover, eyelet & crank handle included on shutters >1750 (shutters that cover personnel access doors)
  • 44mm extruded aluminium slats in white (RAL 9016), black (RAL 9005) or anthracite (RAL 7016).
  • 65mm x 25mm guide channels (colour matched to curtain).
  • Hold to run rocker switch.

Dimensions

Pass Door Systems Motorised Shutter Solutions Protecta Roll Unframed Dimensions

Clearances

The shutter requires the following clearances:

Sideroom: 70mm to each side

Headroom: 165mm box shutters < 1750mm high
If full opening is required, allow an additional 44mm for an extra slat that must be retained in guide when the shutter is fully open. 165mm + 44mm  = 209mm

Headroom: 205mm box (+44mm with stand-off guide) shutters ≥ 1750mm high
If full opening is required, allow an additional 44mm for an extra slat that must be retained in guide when the shutter is fully open. 205mm + 44mm = 249mm

Shutters for access doors require the same measurements i.e. the outer dimension of any frame.

Pass Door Systems Motorised Shutter Solutions Protecta Roll Unframed Clearance

Control options

Pass Door Systems Motorised Shutter Solutions Protecta Roll Control Option Rocker Switch

Rocker switch

As standard

Pass Door Systems Motorised Shutter Solutions Protecta Roll Control Option Key Switch

Key switch

As an option

Pass Door Systems Motorised Shutter Solutions Protecta Roll Control Option Command

Command

Individual command or group command (up to 4 shutters).


Downloads

Dedicated to raising quality and reducing install times.

If you would like to learn more about Pass Door motorised shutter solutions or arrange an initial discussion regarding your requirements, talk to our design team:

Manufactured in Northern Ireland, delivering throughout the UK & Ireland

Manufactured in Northern Ireland, delivering throughout the UK & Ireland

2 year Warranty

1 year Commercial &
2 Year Residential Warranty

Fast Installation (Avg turnaround time)

Fits in just 15 minutes

Committed to safety with full CE Mark

Tested and CE Marked

Patented logo

Patented design no. GB2530590

The UK & Ireland’s First Choice for Quality & Value Steel Doors